5+ Ideas How To Make A Xmas Tree Out Of Paper

5+ Ideas How To Make A Xmas Tree Out Of Paper

DIY ideas on how to make a Xmas tree out of paper will help you create a festive ambiance within your home or workplace. These decorations are not only visually appealing but also serve as a delightful activity of entertainment during their creation. This article will give you instructions for 5 different kinds of paper Christmas tree decorations. Let’s find out with TeeNavi!

1. How to make a Xmas tree out of paper

The first method on how to make a Christmas tree out of paper that we want to introduce to you is very easy to make. Here are the ingredients you’ll need and how you’ll make it:

1.1. Materials

Some of the ingredients you need for how to make a Xmas tree out of paper include:

  • Scissors
  • A marker
  • Construction paper in green or any other color you choose
  • Clear tape
  • Decorations for your tree. For example, they can be glitter, colored paper, stickers, ribbon, confetti,…
  • Glue dots or craft glue to fix the decorations.
  • A hot glue gun
  • Glue sticks
  • You may use paint, glitter, stickers, paper cutouts, or anything else you can think of to decorate your tree as simply or as elaborately as you wish.
how to make a Xmas tree out of paper
Some supplies that you’ll need to make this project

>>>> DON’T MISS OUT: How to make a lemon wreath decoration for Christmas

1.2. Instructions

The steps are as follows:

  • Step 1: Cut two construction paper tree shapes that are exactly the same. Stack two construction paper pieces together and fold them in half.
  • Step 2: Draw a half-tree shape on the outside of your paper stack using a marker. You cut through both sheets of paper following the lines. Now you should have two tree shapes that are the same.
  • Step 3: Next, to link the tree shapes, you need to cut slots in them. Let’s find and mark each tree’s vertical center should start by folding it in half vertically—that is, folding the pointed tip all the way down to the base—and then softly creasing or marking the center. Then you make a cut from the top to the center mark in one tree and from the bottom to the center in the other tree.
how to make a Christmas tree out of paper
The specific instructions for how to make a Xmas tree out of paper
  • Step 4: Combine the two shapes to create the tree. Slide the two pieces together along the slits and you need to make sure the middles match. Then you secure the top and bottom of the tree with a couple of small clear tape pieces. Finally, you unfold the tree so that it stands on its own.
  • Step 5: Let your imagination run wild and enjoy the process of decorating the tree! You can add a touch of sparkle with paint or glitter glue and give your tree a unique look by “flocking” it. You can get creative by cutting ornaments from colored paper using scissors or a hole punch. Then, you stick them onto the tree using glue. You can make a beautiful garland using metallic thread or ribbon, and don’t forget to place a small star or angel on top that is also a unique decoration. 

In addition, to create a 3D star or angel for the tree’s pinnacle, you can use the same cutting and splicing technique as you did for the tree. For secure attachment, hot glue is recommended for fixing items to the tree’s point. Please follow these small but effective tips! Try these great tips when you make how to make a Xmas tree out of paper!

>>>> LOOKING FOR MORE: How to make scented wax sachets as Christmas gifts

2. Make a cone Christmas tree out of paper

The form of this idea on how to make a Christmas tree out of paper is a basic paper cone, please follow the instructions below!

2.1. Prepare ingredients

List of ingredients needed for you to make this how to make a Xmas tree out of paper with a cone shape:

  • Feel free to utilize any decorative paper available or decorate plain paper previously. For a traditional appearance, you can choose green construction paper. Alternatively, you can choose to experiment with patterned craft paper or gift wrap to fashion stunning, contemporary trees. It is recommended to avoid using extremely lightweight paper.
  • You can use a dinner plate, bowl, or other large round object to make a circle template.
  • You can use a hot glue gun and glue stick, craft glue, or glue dots.
  • Scissors.
  • Decorations for the trees depend on your favorite
make a Christmas tree out of paper
The materials that you will need when doing this idea

>>>> CLICK NOW: The best way to make your house smell like Christmas: 12 tips

2.2. Implementation steps

Let’s follow the detailed instructions on how to make a Xmas tree out of paper with this idea!

  • Step 1: You need to create the cones! You can start by tracing a circular object such as a plate or bowl onto your preferred piece of paper. Cut out the traced circle and then proceed to fold it into quarters. You first fold it in half and create a crease, followed by folding it in half again and creating another crease.
  • Step 2: Unfold the circle and cut it into quarters along the crease lines. Each circle of paper will yield four cones. For cones of different heights and sizes, you can use various sizes of plates or templates. If you want to create a larger circle template, you should take a piece of string that is half the desired size of your circle. You will attach a pencil to one end of the string, securing the other end at the center using tape or a pin.
  • Step 3: Then, you pull the string tight and move the pencil in a circular motion to draw a perfect circle.
  • Step 4: Let’s come together to decorate the cones! You can decorate the paper surface using markers, paints, glitter glue, or rubber stamps. Then, attach different ornaments and decorations to the tree by using glue dots or craft glue. If you want to create a more appealing look, consider adding a textured or 3D element such as buttons, sequins, beads, or craft gems. You can use metallic chenille stems (pipe cleaners) or make a shiny ribbon bow to make a tree topper. That’s it! You can place the newly completed pine tree around the house as an added decoration for the upcoming warm Christmas season.
how to make a Christmas tree out of butcher paper
The instruction for making a cone Christmas tree from paper

3. How to make a Xmas tree out of paper 3D

Can we create a stunning 3D Christmas tree using only a sheet of paper and scissors? Of course, it’s okay and this idea is an enjoyable and effortless way to decorate your home for the holiday season. Let’s discover how to make a Christmas tree out of paper!

3.1. Things you’ll need

You only need two ingredients: paper and a pair of scissors to make this how to make a Xmas tree out of paper. For choosing paper, it is recommended to use regular printer paper (20 Lb weight) for creating these 3D paper trees. Because it is easy to fold and cut through. For a green appearance, you may choose green printer paper. Additionally, other suitable options for crafting 3D trees include origami paper, wrapping paper, and scrapbook paper.

how to make a little Christmas tree out of paper
You just need paper and scissors to do this idea

3.2. Process executes

Here are 12 simple steps in how to make a Xmas tree out of paper with a 3D tree idea:

  • Step 1 – Base creases: Get a square paper ready, whether it’s plain colored craft paper or printed paper according to your preference. Let’s fold the square paper diagonally from both sides. Then, flip the paper over and fold it in half both horizontally and vertically.
  • Step 2 – Base fold: You grip the folded paper and push the diagonal creases inwards while drawing the vertical and horizontal creases outward. Smooth out the folded paper to reveal a square design.
  • Step 3 – A closed side folded inward: The existing square design needs to have 2 sides that are closed while 2 sides should remain open. You can proceed by folding the closed side inward and ensuring it aligns with the square’s central line, which divides the square in half diagonally.
  • Step 4 – Unfold the last fold: You unfold the fold that we just made in the previous step. This will leave creases to appear in that specific area of the paper pattern.
  • Step 5 – Flatten the side layer: Bring the side crease to the center of that section and the two new creases to either side of it to flatten it.
  • Step 6 – Fold the side inside: Fold the inner crease outward, keeping the side crease (which is presently positioned in the middle of the two new folds) in its current position.
how to make a Xmas tree out of paper
12 steps to making a 3D Christmas tree
  • Step 7 – Repeat previous steps: Likewise, fold the other half of the current side and make creases in it. Next, turn the design over and repeat the process on the other side.
  • Step 8 – Trim any excess open ends: Cut off the excess open edges of the existing origami paper pattern with a pair of scissors. You’ll see that there will be eight layers in total—four on each side (left and right) of the existing paper design.
  • Step 9 – Make three slits along the sides using scissors: With the layers still intact, four layers on each side, cut three slits on each side of the paper design with scissors, leaving an equal distance between them.
  • Step 10 – Put the slitted parts folded: Hold the 2nd part of one layer from the top. The part’s top side should be folded 45 degrees inward. Fold the remaining two halves of the same layer one at a time.
  • Step 11 – The next layer parts to flip and fold: Flip the layer now and proceed in the same manner as the next layer.
  • Step 12 – Fold and flip sections: You flip and fold one at a time each of the eight layers, which has three sections each. And, those are all the steps you need to take!

4. Make a Christmas tree out of paper with origami

If you don’t know how do you make a Christmas tree out of paper origami, the detailed instructions below are ideal for you. So, this is a fun and easy project that you can decorate your home with this coming Christmas season.

4.1. Ingredients list

Some supplies that you will need to do this how to make a Xmas tree out of paper origami:

  • Adjustable circle cutter
  • Green card stock
  • Bone folder
  • Scissors
  • Wooden skewers
  • Wooden spools
  • Gold beads
  • Hot-glue gun and glue sticks
  • Craft knives
how to make a Christmas tree out of construction paper
Prepare some ingredients

4.2. Steps by steps

Now we will start how to make a Xmas tree out of paper origami following these steps:

  • Step 1: First, you cut green card stock circles with a 2-, 3-, 4-, 5-, and 6-inch diameter for large Christmas trees (for small trees, delete the 6-inch circle). You can use an adjustable circle cutter.
  • Step 2: You use a bone folder and fold each circular in half four times. Using a craft knife, cut off the tip of each circle while it is folded, leaving a little hole in the center.
  • Step 3: Next, you place the smallest circle onto the pointed end of a wooden skewer, allowing the tip to protrude through the circle. Apply hot glue to the underside of the circular where the skewer and paper meet. To be safe, you should hold for ten seconds.
how to make a large tree out of paper
The step-by-step instructions for making Xmas tree from origami paper
  • Step 4: Slide the remaining circles onto the skewer, working from the smallest to the largest round at a time. You should secure them with glue.
  • Step 5: Insert the skewer’s bottom into a spool. Then, you remove and trim the skewer to the desired height. You need to make sure that just the spool is visible underneath the standing tree. After that, you put the skewer back on the spool and fasten it with glue. You put a small amount of glue on the skewer’s top and attach a gold bead.
  • Step 6: Finally, your Xmas tree is complete, place it in your favorite location as decorations.

5. How to make a Christmas tree out of paper magazine

What do you think about using recycled newspapers, magazines, or book pages to make Christmas trees? It’s truly a unique idea with a classic feel. Let’s take a look at the instructions on how to make a Christmas tree out of paper easy with magazines!

5.1. Materials

Things that you need to prepare for implementing this how to make a Xmas tree out of paper:

  • Paper: Magazines or any type such as recyclable and scrapbooking paper are also acceptable.
  • Tree base: Small twigs, slices of bigger branches that are cut with a hand saw or miter saw. Wood discs or mini logs are also available for purchase.
  • Gluing tools: Hot glue gun and craft glue to attach the base.
  • Cutting tool: Scissors
how to make a Xmas tree out of paper
The materials and tools that are needed to prepare

5.2. Instructions

Specific instructions on how to make a Xmas tree out of paper magazine, including 4 steps:

  • Step 1 – Trim paper strips to the appropriate length: The Christmas tree size you can refer to is about 2″ to 3″ diameter at the base and 3″ to 4.5″ tall. You start to cut seven paper strips that are 11 inches long. They begin at a width of 3 inches and decrease by 0.25 inches for each strip until they reach a width of 1.5 inches. After that, cut an additional four or five pieces of paper strips measuring 11 inches long and 1.5 inches wide. This is because folding wider paper strips are much easier to handle than folding extremely narrow ones.
  • Step 2 – Create ruffled paper discs/rosettes: Take a strip of paper and make small accordion folds. It doesn’t have to be perfect. To save time, you can also stack two or three paper strips together while folding and then separate them later. Then, locate the middle point of the folded paper strip by folding it in half. Apply some glue to this area and twist once to create a butterfly shape. The glue will help hold the shape in place. As you open the folds, pinch the middle to form a rosette. As the paper strips become narrower, folding and twisting become more difficult. That’s why we’re initially making several 1.5-inch-wide strips into rosettes. Later, we’ll trim the paper discs/rosettes into smaller ones towards the top of the paper Christmas tree. You can also cut the narrower paper strips in half and create two rosettes instead of one thick one. It can also be helpful!
how to make a Christmas tree out of paper
A Xmas tree from magazine paper
  • Step 3 – Glue and cut rosettes: You start stacking the paper discs/rosettes to form a Christmas tree shape, beginning with the largest at the bottom. You add a small amount of glue or hot glue at the center of each ruffled paper disc while stacking them, firmly pressing down to connect with the previous one. After completing the stacking and gluing process, shape the tops of the paper Christmas trees into a pointed form by trimming them.
  • Step 4 – Attach the base and trunk of your homemade paper Christmas trees: First, you cut some twigs or small branches into 1″ to 2″ long pieces. Then, utilize hot glue to attach them to the bottom center of the paper trees as tree trunks. Afterward, you apply hot glue to fix the base of the tree trunks to bigger wooden discs or cubes to give each tree a stable base. So, you’ve completed them! 

The above article gives you how to make a Xmas tree out of paper with 5 interesting ideas that you can refer to. Hopefully, this article can provide you with a lot of useful knowledge in the process of decorating for the upcoming Christmas season. Please contact TeeNavi immediately if you have any questions that we need to answer!

>>>> RELATED TOPIC: How to decorate a pine tree for Christmas simple and thrifty

Rate this post

Leave a Reply

Your email address will not be published. Required fields are marked *